When you turn on the SECRET MINI call block for the first time (with the Internet connected), it is recommended not to turn it off for 5 minutes to update the firmware, in order to avoid malfunctions.
To disconnect the Secret MINI call block on the table, you will need the following set of equipment and tools: - a small Phillips screwdriver; - a small flat screwdriver; - SECRET MINI panel; - Internet network with a bandwidth of 5 MB/s. - Intercom system from the list of those supported by the Secret MINI panel. We also recommend for installation: - EM-Marine contactless key. - PoE power supply connected to a 220 V power supply. The Secret Mini intercom panel supports the following intercom models:
<b>Eltis</b>;DP400хххх<br> DP42хххх (ELTIS_DP400)<br> DP30хххх (ELTIS_DP303)<br> DP500хххх (ELTIS_DP500)<br> ЦП100-ххх (ELTIS_CP100)<br> where x can be any number or letter;
<b>Visit</b>;ALL models are supported except the right list; Models without switches: БУД-30хК-хх, BUD-30xS-xx, etc<br> 500 series<br> where x can be any number or letter<br> gate versions with index P
<b>Cyfral</b>;CCD-2094.1 <br> CCD-2094.1M <br> CYFRAL 2094/tc <br> Cyfral INTEL<br>; CCD-2094M, as well as intercom models without switches, such as M-10, M-20, CCD-20, CCD-40, etc.
<b>Metacom</b>;MK2012-ххх (METAKOM_MK2012)<br> МК2003.ххх (METAKOM_MK2003)<br> МК2003.ххх Red Scorpion (METAKOM_MK2003_RS) <br> where x can be any number or letter; Series 2018<br> Digital intercoms series MK2007 <br> Integration with intercoms without switches is not possible (handsets are connected directly to the panel), for example series 2008
<b>Factorial</b>; Current series