Device re-opening delay
This parameter means the time in seconds when commands to open the Boxer will be ignored (for example, for gates that have this parameter >3 seconds).
Let's look at how it will work using an example
Let's look at how it will work using an example
In this example, we have one lifting gate and two cameras with recognition
The car drives up to the gate, the system reads the number, recognizes it and sends a command to open
The car drives away, and its license plate from the back is also recognized and am opening command is given.
The gate opens again, although there are no more cars.
The gate opens again, although there are no more cars.
How to solve this problem - the delay for re-opening the device is set.
This parameter means the time in seconds when commands to open the Boxer will be ignored (for example, for gates that have this parameter >3 seconds).
In the described example, the delay is set to 23 seconds (the delay is set experimentally)
Installation follows the standard scheme (open\op terminal)
This parameter means the time in seconds when commands to open the Boxer will be ignored (for example, for gates that have this parameter >3 seconds).
In the described example, the delay is set to 23 seconds (the delay is set experimentally)
Installation follows the standard scheme (open\op terminal)