Reader firmware update
During the first installation or to solve a problem with broken keys (new functionality - repairing broken keys) in the SECRET TOP panel, you need to update the reader in the intercom. Currently, the current version of RFID READER VERSION: 2.0.3.3 Differences from version 1.0.6.14:
● Improving the stability of the non-copyable key system
● Solving the problem with broken keys (new functionality - repairing broken keys)
IMPORTANT! When updating, the Secret Top panel must be connected to the Internet and to a power supply.
● Improving the stability of the non-copyable key system
● Solving the problem with broken keys (new functionality - repairing broken keys)
IMPORTANT! When updating, the Secret Top panel must be connected to the Internet and to a power supply.
Example of reader firmware update
Launch a telegram bot UfanetMQTTWatcher
To get started, you need to write /start, and then enter the MAC address of the Secret TOP panel that needs to be updated.
After that, write /detail for detailed information.
To get started, you need to write /start, and then enter the MAC address of the Secret TOP panel that needs to be updated.
After that, write /detail for detailed information.
The screenshot shows that the firmware version is out of date:
RFID READER VERSION: 1.0.6.14.
RFID READER VERSION: 1.0.6.14.
Create a hotspot on your mobile phone or other Wi-Fi device with the following parameters:
Point name: svptk
Login password: i0W&5IY2
IMPORTANT! A mobile phone (or other device) and the cellular operator to which it is connected must be able to distribute the Internet via Wi-Fi.
Point name: svptk
Login password: i0W&5IY2
IMPORTANT! A mobile phone (or other device) and the cellular operator to which it is connected must be able to distribute the Internet via Wi-Fi.
In less than a minute, the panel will connect to the access point and begin to download and install the firmware on its own.
On the mobile phone screen at this moment you can see that the number of connected devices has changed (see screenshot).
There will be no indication on the panel screen.
On the mobile phone screen at this moment you can see that the number of connected devices has changed (see screenshot).
There will be no indication on the panel screen.
After about 5 minutes, the panel will update.
The access point on the phone will have the status “No connected devices.”
The access point on the phone will have the status “No connected devices.”
The firmware version was updated from 1.0.6.14 to 2.0.3.3
FAQ:
Question: Why do I have some random numbers written instead of the firmware version? (see screenshot)
Answer: Most likely, a key was brought to the reader during the update. Just wait 10 minutes, and the current firmware version will appear in the bot; no additional actions are required.
Answer: Most likely, a key was brought to the reader during the update. Just wait 10 minutes, and the current firmware version will appear in the bot; no additional actions are required.
Question: It’s been more than 10 minutes and the panel is not being updated.
Answer: It is recommended to turn off the power (unplug the terminals on the panel or turn off the power supply), and then turn on the panel.
Answer: It is recommended to turn off the power (unplug the terminals on the panel or turn off the power supply), and then turn on the panel.
Question: Is it possible to update the Secret TOP panel reader remotely over the network?
Answer: No, you can update the Secret TOP panel reader only by being near it at a distance of about 1 meter from the calling panel.
Answer: No, you can update the Secret TOP panel reader only by being near it at a distance of about 1 meter from the calling panel.
Question: What should I do if the reader’s firmware version is not displayed for a long time (more than an hour or a day after installation)?
Answer: If after rebooting and before updating the reader the firmware version is not written and there is a problem with broken keys on this panel, we recommend contacting technical support to replace the panel.
Answer: If after rebooting and before updating the reader the firmware version is not written and there is a problem with broken keys on this panel, we recommend contacting technical support to replace the panel.
