You need to log into the provider’s personal account using the credentials provided by the manager at my.domovoy.city. In your personal account, enter the address where the panel will be installed using the instructions for establishing an address, if you already have the required address set up, you can skip this step. Next, to create a panel, click the “Add intercom” button, select “SECRET TOP call block” in the window that opens.

Fill in the fields Address, Entrance, Range of apartments.

Enter the MAC address of the panel and the corresponding intercom type from the drop-down list and the corresponding settings. (Example with the Vizit type)

Now the factory settings for “Microphone Volume” and “Microphone Sensitivity” are set. You can return to their settings later.

Next, indicate the name of the camera and select the tariff, time zone, access level, and management of rights to the camera.

The Secret Top panel is now added

Upon completion, in the SECRET TOP Call Block section, a panel will appear to which the camera will be linked.

You can change the settings for the camera by going to the ucams website, section “Camera Settings”, where you can turn on or off the video stream, sound and night mode, as well as change the resolution, ntp server, bitrate; if necessary, you can reboot the camera. This section will contain information about the camera itself: model, software version, mac address, camera number, time zone.