If you want your own Flussonic video surveillance server:
● watcher - not needed
● need a clean installation of Media Server

1. You need a server with characteristics no lower than those described:
we came up with two VDN storage servers

● for 5 days (3, 5, and 10 days)
● for 30 days (archive for 30 and 15 days)
their characteristics: For 5 days 550 cameras
● SuperMicro 3U platform 6038R-E1CR16H
● Processor Intel Xeon E5-2620 V3 2pcs
● RAM Kingston Server Premier DDR4 8GB RDIMM (PC4-21300) 2666MHz ECC Registered 1Rx8, 1.2V (KSM26RS8/8) 4 pcs
● SSD 240 Gb SATA 6Gb/s Micron 5200 MAX MTFDDAK240TDN> 2.5" 2 pcs
● Hard drive 6 Tb SATA 6Gb/s Western Digital Ultrastar DC HC310 <HUS726T6TALE6L4> 3.5" 7200rpm 256Mb 16 pcs
● SuperMicro basket MCP-220-83605-0N 2 baskets HotSwap 2.5" 1 pc.
Reservation – 60
For 30 days 550 cameras
● Supermicro 6048R-E1CR36N, 1 piece;
● CPU Intel Xeon E5-2620V4, 2 pcs;
● RAM Kingston Server Premier DDR4 8GB RDIMM <KSM24RS8/8>, 8pcs;
● SSD Intel DC S3710 200 GB <SSDSC2BA200G401>, 2 pcs
● HDD WD Ultrastar DC HC520 12TB <HUH721212ALE604> (0F30146), 36pcs
Reservation – 50

2. You need a key You can buy it directly from flux (then you will contact them in case of questions with flux technical support) or from us (then you will contact us in case of questions with flux technical support)

3. installation requirements:
● white IP address on the server.
● domain name of the server, which will resolve to the white IP address of the server.
● ports 80 and 443 open for external access.
● the server must have access via port 554 to your cameras to work via the RTSP protocol
● enter the following IP addresses in api_allowed_from in the Flussonic configuration:
● 81.30.195.190
● 81.30.199.70
● tell us the administrator login and password with the rights to edit the Flussonic configuration via the API.
● update Flussonic to software version 22.04
● IMPORTANT, it must be a server on which the client does not have any other services.
● Also specify the path to the archive storage - for example "/storage"

4. After switching to your flux, we transfer all current cameras and archives to you, dividing some you have, some we don’t.
Software parameters for the server:
Ubuntu OS 16.04.6
Installed packages:
● ifenslave (bonding of network interfaces)
● vlan (vlans on network interfaces)
● dbus (for timedatectl, time synchronization over the network)
● quagga (for zebra routing daemon)
● ethtool (package of utilities for working with network interfaces)
● sysstat (for analyzing system performance)
● ifstat (statistics on network interfaces)
● man (doc reader package)
● smartmontools (for testing disk health)
● telnet (to control quagga via telnet)
● python2.7-minimal (for playbook ansible)
● flussonic (streaming software)

Disks for OS, sata, connected via HBA, assembled into software raid1 using mdadm

Disks for storage, archive storage, sata, connected via HBA, assembled into software raid60 using mdadm