Enabling motion detection on Beward cameras
In order to enable motion recognition on the Beward camera, you need to go to the “Motion Detection” section and enter the following data:
You need to enable the "HTTP notification" checkbox and enter "event=motion_alarm", set the remaining settings as on the photo
Then in the “Notification” section you need to fill in all the fields according to the photo, in the “Address” field you need to enter “77.79.161.4:80”*, and in the “Request” field you need to enter “/admin/api/v0/event/beward/CAMERA NUMBER
We take the camera number in your personal account in the “Cameras” -> “Device number” section.
*If requests to port 80 do not leave your network, check your network settings and contact your administrator
We take the camera number in your personal account in the “Cameras” -> “Device number” section.
*If requests to port 80 do not leave your network, check your network settings and contact your administrator
Be sure to enable the “Motion Detection” function in the camera settings in the “Cameras” section.
The setup is complete.
